Proudly Canadian!
CALCI FINE Lime Coating
Mineral coating, made from natural hydraulic lime, pre-mixed with select mineral aggregates. Suitable for historic restoration, housing and natural & eco-sustainable construction. 100% natural ingredients | (Volatile Organic Compound) VOC FREE (less than ≤ 100 μg/m3) Form: Powder Colour: Light beige INTERIOR only Surfaces Use on sound, stable...
"How much CALCI do I need?"
|
|
1 kg |
25 kg |
|
Approximate Coverage |
2 to 4 sqft |
50 to 100 |
|
Approximate Coverage (2 coats) |
1 to 2 sqft |
25 to 50 |
Mineral coating, made from natural hydraulic lime, pre-mixed with select mineral aggregates.
Suitable for historic restoration, housing and natural & eco-sustainable construction.
100% natural ingredients | (Volatile Organic Compound) VOC FREE (less than ≤ 100 μg/m3)
Form: Powder
Colour: Light beige
INTERIOR only
Surfaces
Use on sound, stable & non-decaying substrates: on hydrated and hydraulic natural lime-based renders and plasters, pre-mixed natural hydraulic lime-based renders & mortars, mortars (concrete, cement, etc.) and old mineral renders/ plasters.
Do not use on: drywall- old paint - synthetic coatings - wood
Finish Fine grain textured appearance (granulometry≈ 0.2mm)
Level of difficulty 1 (Easy)
Tools Stainless steel smooth trowel and sponge trowel (for decorative plasters and coatings.)
Advantages
Specifically designed to protect and restore while preserving surface breathability & water vapor permeability.
Coverage
Approximately 7 to 10 sqft/KG | 1- 1.5kg/ m² per coat*
2 coats of CALCI FINE are required (or 1 coat of CALCI FINE on 1 coat of CALCI)
*Coverage may significantly vary depending on coat thickness and surface type.
Made In Italy
Essential tools to achieve this finish
Look
Frequently Asked Questions
No, limewash paints are sensitive to extreme cold and heat. The ideal temperature for use is between 7 and 27° C. And you can not apply lime coat when raining, make sure the weather forecast does not call for rain in the 48 hours following application.
For Patina Opaque wait a minimum of 6-8 hours between coats.Respect stipulated drying times. It is imperative to have a fully dry surface before applying the next coat if needed.
Cosi paint for Patina finish is 97% natural ingredients, virtually VOC FREE (less than 0.75gr/l.)
For Patina finish you need a limewash brush.
Cosi Paint for Patina finish can be used in interior and exterior.
You will receive all products you need to achieve the finish: COSI paint, quantity of pigment required for the chosen colour and quantity of primer & paint, how-to guide and technical sheet.
If you have added tools to your order, they will come in your package too.
For Patina Light you need only one coat of paint.
For Patina Opaque 2 coats are required and we recommend to tint both.