Proudly Canadian!
White & Off-White - Burnished Finish
Transform your living space with our White Burnished Finish limewash. This natural, eco-friendly paint provides a bright, elegant look, perfect for creating an inviting and sophisticated atmosphere. The pure white hue complements any decor, while the burnished finish adds subtle richness and texture. Ideal for those who prioritize sustainability and...
Low to no VOC
Indoor
Outdoor
Limewash Brush
Easy
"How much paint do I need?" Use our surface calculator to fill the quantity selector above.
1 kg of paint covers approximately 80 ft² per coat and 3 coats are required to achieve the BURNISHED finish. 1 kilo will cover 25–30 ft² in three coats. (Ex: For a 100 ft² wall surface: buy 4 kilos of paint.)
Enter your total project area, or calculate based on wall dimensions.
Important notice about colour accuracy
Phone and computer screens display colours differently depending on their calibration and resolution. As such, the hue you see on your screen may not be an accurate representation of the true colour. Take a look here for more information.
If you're not sure about the colour, you can also :
- Order a 125g sample by selecting 125g (sample) size
- Get a hand-made colour swatch
Download MULTI Technical Sheet PDF Download MULTI MSDS PDF
Matte mineral concrete-like finish with distinct colour nuances. Creates a surface with alternating rough and polished aspects.
Looks
Essential tools to achieve this finish
MIXING SERVICES
Don't want to do the mixing yourself? Let us do it for you with our mixing service. The paint will be shipped to you, carefully prepared by us and ready for use....
Frequently Asked Questions
Natural Paints are not suitable for interior wet areas and are best for low-traffic rooms. In heavy traffic areas and areas that may be exposed to occasional splashing, you can use tintural's Aqua Protection as a light protective finish coat.
No, limewash paints are sensitive to extreme cold and heat. The ideal temperature for use is between 7 and 27° C. And you can not apply lime coat when raining, make sure the weather forecast does not call for rain in the 48 hours following application.
Wait a minimum of 6-8 hours between coats.Respect stipulated drying times. It is imperative to have a fully dry surface before applying the next coat.
Multi primer & paint for Burnished finish is 96% natural ingredients, virtually VOC FREE (less than 0.58gr/l.)
For burnished finish you need a limewash brush AND a trowel
Multi primer & paint for Burnished finish can be used in interior and exterior.
-first, determine whether the surface can be split to accommodate wall angles, decorative elements or light.
- depending on ceiling height, set a work surface to avoid making stripes.
-for the third coat of paint, use a slightly more diluted (but not too diluted) mixture to give a wider opening.
- use a stainless steel float (stucco float) with a flexible or semi-rigid blade. No sponges, no plastic smoothers.
Don't wait until the paint is too dry to iron, but there's no precise rule because it depends on the substrate and ambient temperature (I'd say 15 to 20 minutes).The aim is to crush the mixture without tearing it.
If the wall is really big, you can work in pairs: one paints and the other applies.
But for a concrete effect, all you need to know is that it's the way you cover the wall during the first two coats that determines the result. As a general rule, the smaller the movements, the more "crushed" the effect.
The smoother must not tear off layers of paint, and the opening angle must be fairly shallow (15° to 20°) to exert sufficient, even force.
You can use a water sprayer, but with care.
You will receive all products you need to achieve the finish: MULTI primer & paint, quantity of pigment required for the chosen colour and quantity of primer & paint, how-to guide and technical sheet.
If you have added tools to your order, they will come in your package too.
We recommend tinting the primer, 3 coats are required to achieve Burnished finish.