Purple - Burnished Finish
This eco-friendly Purple Limewash with a Burnished Finish adds a pop of color and sophistication to your walls, elevating your living space. The bold maroons, delicate pinks, and rich plums come together to create a charming and inviting atmosphere, perfect for any room. The burnished finish offers a polished shine...
Low to no VOC
Indoor
Outdoor
Distemper
Easy
"How much paint do i need ?" Use our surface calculator to fill the quantity selector above! You can paint approximately 80 sft² with 1 kg of Burnished Paint, regardless of coatings.
Just fill in your surface in the calculator and you'll get what you need !
Important notice about colours
The accuracy of a colour on a screen is in no way reliable and depends on its calibration and resolution. Each computer or phone screen does not have the same calibration and does not provide an accurate hue. Take a look here for more informations.
If you're not sure about the colour, you can also :
- Order a 125g sample by selecting 125g (sample) size
- Get a hand-made color swatch
Download MULTI Technical Sheet PDF Download MULTI MSDS PDF
This eco-friendly Purple Limewash with a Burnished Finish adds a pop of color and sophistication to your walls, elevating your living space. The bold maroons, delicate pinks, and rich plums come together to create a charming and inviting atmosphere, perfect for any room. The burnished finish offers a polished shine that reflects light, creating a warm and welcoming ambiance. Opt for this option to infuse your home with a harmonious blend of sustainability and vibrant hues, resulting in a dynamic and stylish environment.
Essential tools to achieve this finish
Frequently Asked Questions
Natural Paints are not suitable for interior wet areas and are best for low-traffic rooms. In heavy traffic areas and areas that may be exposed to occasional splashing, you can use tintural's Aqua Protection as a light protective finish coat.
No, limewash paints are sensitive to extreme cold and heat. The ideal temperature for use is between 7 and 27° C. And you can not apply lime coat when raining, make sure the weather forecast does not call for rain in the 48 hours following application.
Wait a minimum of 6-8 hours between coats.Respect stipulated drying times. It is imperative to have a fully dry surface before applying the next coat.
Multi primer & paint for Burnished finish is 96% natural ingredients, virtually VOC FREE (less than 0.58gr/l.)
For burnished finish you need a limewash brush AND a trowel
Multi primer & paint for Burnished finish can be used in interior and exterior.
-first, determine whether the surface can be split to accommodate wall angles, decorative elements or light.
- depending on ceiling height, set a work surface to avoid making stripes.
-for the third coat of paint, use a slightly more diluted (but not too diluted) mixture to give a wider opening.
- use a stainless steel float (stucco float) with a flexible or semi-rigid blade. No sponges, no plastic smoothers.
Don't wait until the paint is too dry to iron, but there's no precise rule because it depends on the substrate and ambient temperature (I'd say 15 to 20 minutes).The aim is to crush the mixture without tearing it.
If the wall is really big, you can work in pairs: one paints and the other applies.
But for a concrete effect, all you need to know is that it's the way you cover the wall during the first two coats that determines the result. As a general rule, the smaller the movements, the more "crushed" the effect.
The smoother must not tear off layers of paint, and the opening angle must be fairly shallow (15° to 20°) to exert sufficient, even force.
You can use a water sprayer, but with care.
You will receive all products you need to achieve the finish: MULTI primer & paint, quantity of pigment required for the chosen colour and quantity of primer & paint, how-to guide and technical sheet.
If you have added tools to your order, they will come in your package too.
We recommend tinting the primer, 3 coats are required to achieve Burnished finish.