Capa base PRIMA
Para su uso con pinturas a base de cal, esta imprimación ecológica PRIMA está formulada para consolidar el sustrato y...
Para su uso con pinturas a base de cal, esta imprimación ecológica PRIMA está formulada para consolidar el sustrato y equilibrar su capacidad de absorción, lo que le proporciona una buena capacidad de bloqueo sin afectar su transpirabilidad. Reduce el riesgo de juntas visibles al evitar que el acabado se seque demasiado rápido.
93% ingredientes naturales, LIBRE DE COV (menos de 0,20gr/l.)
Forma : Líquido, transparente.
Uso : Interior y exterior.
PRIMA Eco Undercoat se puede utilizar para:
-reforzar soportes inconsistentes, consolidar soportes potencialmente escamosos o pulverulentos y asegurar la correcta adhesión de las capas superiores.
-Compensar las pequeñas diferencias de absorción del soporte: en el caso de revoques premezclados o
morteros de composición similar al yeso original.
-reducir la absorción del sustrato: limitar la absorción de apósitos muy absorbentes
evitando que el acabado se seque demasiado rápido en climas cálidos y reduciendo el riesgo de
articulaciones visibles.
Superficies
-Soportes de yeso, pladur, cal y arcilla. -Pinturas y revestimientos a base de resinas vegetales.
-Productos sintéticos lijados (pinturas hidrófugas, revestimientos de alto brillo o pinturas decorativas)
-Sustratos rellenos de mortero
- Soportes de baja absorción (revoques, revestimientos y estucos compactos y sintéticos)
Acabado: Mate
Nivel de dificultad: Fácil
Características
-Penetra fácilmente sin formar película.
-Muy transpirable
Herramientas: Brocha o rodillo sintético. Limpieza con agua y jabón.
Cobertura
Aproximadamente 90-110 pies cuadrados/l (≈8-10 m2/l) después de la dilución para 1 capa (para aplicaciones sobre superficies lisas y de absorción normal).
Hecho en Italia

Frequently Asked Questions
Natural Paints are not suitable for interior wet areas and are best for low-traffic rooms. In heavy traffic areas and areas that may be exposed to occasional splashing, you can use Tintural's Aqua Varnish as a light protective finish coat.
No, limewash paints and natural coatings are sensitive to extreme cold and heat. The ideal temperature for use is between 7 and 27° C. Do not apply lime paint when its raining and make sure the weather forecast does not call for rain in the 48 hours following application.
Wait a minimum of 6-8 hours between coats. Respect stipulated drying times. It is imperative to have a fully dry surface before applying the next coat.
Tintural paints and coatings are between 95% and 100% natural, and have low to no VOCs (Volatile Organic Compounds).
Multi Paint & Primer can be used in interior and exterior applications.
-First, estimate the surface area, taking into account obstructions, decorative features, and fixtures.
-if the ceiling is high, use scaffolding or another work surface to ensure continuous application without stopping midway, which can cause striping.
-for the third coat of paint, use a slightly more diluted (but not too diluted) mixture to give a wider opening.
-For the third coat of paint, use a slightly more diluted (but not too diluted) mixture to maintain workability and achieve consistent coverage across the surface.
-use a stainless steel float (stucco float) with a flexible or semi-rigid blade. No sponges, no plastic smoothers.
-Burnish the surface before the paint dries completely — timing varies with substrate and temperature (around 15–20 minutes). The aim is to smooth and compress the coating without damaging it.
-For large wall surfaces, consider working with a partner, with one painting and the other burnishing with the trowel as the paint begins to dry.
-For a concrete effect, all you need to know is that it's the way you cover the wall during the first two coats that determines the result. As a general rule, the smaller the movements, the more "crushed" the effect.
-Angle the trowel against the wall at a shallow 15°–20° to exert even pressure, taking care not to tear off layers of paint.
Your package will include all products for your project: the ordered quantity of paint or coating product, the appropriate amount of pigment for your chosen colour based on that paint quantity, the how-to guide and technical sheet, and any tools you added to your order.
We recommend tinting the primer, particularly for darker paint colours.