DOLCE Lime Paint & Primer (125g)
95% natural ingredients VOC FREE (less than 0.54gr/l.) Form: PowderUse: INTERIOR ONLY. Not suitable for floors and wet areas. Surfaces: Wall & Ceiling Surfaces: drywall, plaster, stucco, painted/treated surfaces, masonry surfaces (stone, brick, concrete), wood Finish PRIMER: ensures proper adherence of fine-textured natural paints & coatings SMOOTH: matte mineral finish with minimal...
Intérieur
Extérieur
Maladie de Carré
Facile
"How much paint do i need ?" Use our surface calculator to fill the quantity selector above! You can paint approximately 90 sft² with 1 kg of Dolce Paint, regardless of coatings.
Just fill in your surface in the calculator and you'll get what you need !
Remarque importante concernant les couleurs
La précision d’une couleur sur un écran n’est en aucun cas fiable et dépend de son calibrage et de sa résolution. Chaque écran d’ordinateur ou de téléphone n’a pas le même calibrage et ne fournit pas une teinte précise. Jetez un oeil ici pour plus d'informations.
Si vous n'êtes pas sûr de la couleur, vous pouvez également :
- Commandez un échantillon de 125 g en sélectionnant la taille 125 g (échantillon)
- Obtenez un échantillon de couleur fait à la main
For use as PRIMER and to create the SMOOTH FINISH
95% natural ingredients
VOC FREE (less than 0.54gr/l.)
Form: Powder
Use: INTERIOR ONLY. Not suitable for floors and wet areas.
Surfaces: Wall & Ceiling Surfaces: drywall, plaster, stucco, painted/treated surfaces, masonry surfaces (stone, brick, concrete), wood
Finish
PRIMER: ensures proper adherence of fine-textured natural paints & coatings
SMOOTH: matte mineral finish with minimal texture & colour nuances
Level of difficulty
Easy
Tools : Limewash Brush or Roller. Cleaning with soap and water.
Advantages
This product can be applied with a brush OR a roller!
Coverage
Approximately 90 ft2/KG* (≈9 m2/KG) for 1 coat
Made in Italy
Essential tools to achieve this finish
Frequently Asked Questions
Natural Paints are not suitable for interior wet areas and are best for low-traffic rooms. In heavy traffic areas and areas that may be exposed to occasional splashing, you can use tintural's Aqua Protection as a light protective finish coat.
No, limewash paints are sensitive to extreme cold and heat. The ideal temperature for use is between 7 and 27° C. And you can not apply lime coat when raining, make sure the weather forecast does not call for rain in the 48 hours following application.
Wait a minimum of 6-8 hours between coats.Respect stipulated drying times. It is imperative to have a fully dry surface before applying the next coat.
Multi primer & paint for Burnished finish is 96% natural ingredients, virtually VOC FREE (less than 0.58gr/l.)
For burnished finish you need a limewash brush AND a trowel
Multi primer & paint for Burnished finish can be used in interior and exterior.
-first, determine whether the surface can be split to accommodate wall angles, decorative elements or light.
- depending on ceiling height, set a work surface to avoid making stripes.
-for the third coat of paint, use a slightly more diluted (but not too diluted) mixture to give a wider opening.
- use a stainless steel float (stucco float) with a flexible or semi-rigid blade. No sponges, no plastic smoothers.
Don't wait until the paint is too dry to iron, but there's no precise rule because it depends on the substrate and ambient temperature (I'd say 15 to 20 minutes).The aim is to crush the mixture without tearing it.
If the wall is really big, you can work in pairs: one paints and the other applies.
But for a concrete effect, all you need to know is that it's the way you cover the wall during the first two coats that determines the result. As a general rule, the smaller the movements, the more "crushed" the effect.
The smoother must not tear off layers of paint, and the opening angle must be fairly shallow (15° to 20°) to exert sufficient, even force.
You can use a water sprayer, but with care.
You will receive all products you need to achieve the finish: MULTI primer & paint, quantity of pigment required for the chosen colour and quantity of primer & paint, how-to guide and technical sheet.
If you have added tools to your order, they will come in your package too.
We recommend tinting the primer, 3 coats are required to achieve Burnished finish.