Fièrement Canadien !
Peinture et apprêt à la chaux MULTI (1 kg)
96% d'ingrédients naturels SANS COV (moins de 0,58 gr/l.) La texture de MULTI permet de masquer les imperfections de surface ! Produit multi-usages qui crée des...
Faible ou nul en COV
Intérieur
De plein air
maladie de Carré
Facile
125 gr covers approx. 10 sft in one coat. Samples are great to confirm that the colour suits and to see the products' texture. Be mindful that the finished look, however, is only achieved when applied to a larger surface.
Avis important concernant les couleurs
La précision d'une couleur sur un écran n'est en aucun cas fiable et dépend de son calibrage et de sa résolution. Chaque écran d'ordinateur ou de téléphone n'a pas le même calibrage et ne fournit pas une teinte précise. Consultez ce lien pour plus d'informations.
Si vous n'êtes pas sûr de la couleur, vous pouvez également :
- Commandez un échantillon de 125 g en sélectionnant la taille 125 g (échantillon)
- Obtenez un échantillon de couleur fait à la main
À utiliser comme APPRÊT et pour créer la finition TEXTURÉE et BRUNIE
Télécharger le guide pratique BURNISHED au format PDF Télécharger le guide pratique TEXTURED au format PDF
96% d'ingrédients naturels
SANS COV (moins de 0,58 gr/l.)
La texture de MULTI permet de masquer les imperfections de surface ! Produit multi-usages qui crée des textures uniques et/ou des finitions effet béton.
Forme : Poudre
Utilisation : INTÉRIEUR ET EXTÉRIEUR. Ne convient pas aux sols et aux pièces humides intérieures.
Surfaces : Pour les surfaces murales : cloisons sèches, plâtre, stuc, surfaces peintes/traitées, surfaces de maçonnerie (pierre, brique, béton, ciment, mortier)
.
Finition
APPRÊT : assure une bonne adhérence des peintures et revêtements naturels granulaires
TEXTURÉ : texture granuleuse minérale mate avec des nuances de couleurs
BRUNISSÉ : finition mate, aspect béton minéral, aux nuances de couleurs prononcées. Crée une surface alternant des aspects bruts et polis.
Niveau de difficulté
Facile : APPRÊT et TEXTURÉ
Technique : BRUNISSÉ
Couverture : Environ 80 pi2/kg* (≈7,5 m2/kg) pour 1 couche
Outils Brosse à chaux (+ truelle pour finition BRUNISSÉE uniquement). Nettoyage à l'eau et au savon.
Fabriqué en Italie
Looks
Essential tools to achieve this finish
Frequently Asked Questions
Natural Paints are not suitable for interior wet areas and are best for low-traffic rooms. In heavy traffic areas and areas that may be exposed to occasional splashing, you can use Tintural's Aqua Varnish as a light protective finish coat.
No, limewash paints and natural coatings are sensitive to extreme cold and heat. The ideal temperature for use is between 7 and 27° C. Do not apply lime paint when its raining and make sure the weather forecast does not call for rain in the 48 hours following application.
Wait a minimum of 6-8 hours between coats. Respect stipulated drying times. It is imperative to have a fully dry surface before applying the next coat.
Tintural paints and coatings are between 95% and 100% natural, and have low to no VOCs (Volatile Organic Compounds).
Multi Paint & Primer can be used in interior and exterior applications.
-First, estimate the surface area, taking into account obstructions, decorative features, and fixtures.
-if the ceiling is high, use scaffolding or another work surface to ensure continuous application without stopping midway, which can cause striping.
-for the third coat of paint, use a slightly more diluted (but not too diluted) mixture to give a wider opening.
-For the third coat of paint, use a slightly more diluted (but not too diluted) mixture to maintain workability and achieve consistent coverage across the surface.
-use a stainless steel float (stucco float) with a flexible or semi-rigid blade. No sponges, no plastic smoothers.
-Burnish the surface before the paint dries completely — timing varies with substrate and temperature (around 15–20 minutes). The aim is to smooth and compress the coating without damaging it.
-For large wall surfaces, consider working with a partner, with one painting and the other burnishing with the trowel as the paint begins to dry.
-For a concrete effect, all you need to know is that it's the way you cover the wall during the first two coats that determines the result. As a general rule, the smaller the movements, the more "crushed" the effect.
-Angle the trowel against the wall at a shallow 15°–20° to exert even pressure, taking care not to tear off layers of paint.
Your package will include all products for your project: the ordered quantity of paint or coating product, the appropriate amount of pigment for your chosen colour based on that paint quantity, the how-to guide and technical sheet, and any tools you added to your order.
We recommend tinting the primer, particularly for darker paint colours.